With the engine running, push the button in quickly four times. Any time rear electrical wires are spliced or probed the should be sealed up with elctrical wire sealer. The most recent time had no effect on the fuses blowing. We changed the bulbs, checked the fuses, still can't find the problem. This will allow you to pull the headlight assembly forward. When I got under the truck I layed there looking and figured why not try this taped up spot first. I hope this helps someone!! You'll probably have to remove the windshield washer reservoir, and maybe even the clutch master cylinder if it has one , to get to it.
For those of you who face this exact problem, I found a blown fuse in the fuse panel in my cab of the truck. I use it for my sirius satalite radio. I kinda forgot about this site. I hope this helps someone!! Either that or go through your entire wiring harness. Just thought I would share. That is why were showing this content at this moment.
When the bolt is removed, you can unplug the harness assembly from it by pulling straight out on the harness. From many options on the net we are sure this image may well be a perfect reference for you, and we sincerely we do hope you are satisfied with what we present. Check repair book but my 89 has circuit breaker in headlight switch. Changed the fuse, started the truck without problem and let it idle about 5 minutes. Called my friend just a bit ago, he said maybe later tonight or tomorrow we'll start working on a few more things.
Just thought I would share. Hey man, thanks for posting this. The dealer stated that the circuit burns out because of the location, but the part is not under recall. . S10donkey answered 6 years ago don't do any of that!. I hope this helps someone!! Sorry for the long post.
I've checked fuses, bulbs, and tried changing the socket. Keywords for 1991 Chevy S10 Wiring Diagram :. Let us know what you find and how it goes. He made copies of the wiring out of a manual already this week. They are all the ground wires for the tail lights. This was the place in the wire bundle where all the wires meet in the back right before all joining together to head up through the frame rail.
It was a red wire from the front that connected to the brown tail light wire. Just be ready to put out the fire and pull the fuse. He believes the fire probably started in the fuse box in the engine compartment, then spread to engulf the whole engine. The left side park light wire is the brown one. Called my friend just a bit ago, he said maybe later tonight or tomorrow we'll start working on a few more things.
The only other problem I've encountered with the truck is the gauges acting a little odd at times. There is ground wire on body in front of battery. Then an hour later I hit a bump driving down the road and it blew. A factory repair manual or Also Most Public libraries also have auto repair info and wiring diagrams on it. James answered 8 months ago i done everything ,,checked fuses everwhere.
Once replacing that fuse, the problem continued. Also, the computers often caused stalling or no-start conditions, but not blowing fuses. The daytime running lights were driving me crazy. . Since it is the strain on the single ground wire connected to the connector that leads to failure, it is best to tie a new ground or clip the ground wire coming out of the plug and resplice it into one of the other five wires. When I read this thread it motivated me to go tinker with it again.