Config report Prints a list of all the product settings. . This is the default setting. This menu item also does not reflect the current operating speed of the product. Less paper curl If printed pages are consistently curled, use this option to set the product to a mode that reduces curl. Menu item Description Cleaning mode Use this option to clean the product if you see toner specks or other marks on the printed output.
. Paper out action Wait forever Select how the product should react when a Override print job requires a size or type that is not available or when a specified tray is empty. The default setting is High. Press the down arrow or the up arrow to navigate the listings. Wait until the process is complete. Print quality Cartridge low 1-20 The percentage threshold determines when the product begins reporting low toner.
The default setting is Off. . This setting is used for heavy media. When quiet Off mode is turned on, the product prints at a slower speed. Menu item Sub-menuitem Sub-menuitem Description Language Select the language for the control-panel display messages and the product reports.
Select Cancel to automatically cancel the print job after a specified delay. . Use the control-panelmenus To gain access to the control-panelmenus, complete the steps below. . The information contained herein is subject to change without notice.
. Press the down arrow to decrease the time. . Press the up arrow to increase the time, up to 3600 seconds. Quiet mode On Enable or disable quiet mode.
. Includes network information when the product is connected to a network. Print density 1—5 Select the amount of toner to apply to thicken edges and lines. Discard the page that prints. The default setting is Off. The following are the main menus. The cleaning process removes dust and excess toner from the paper path.
The print server can overwrite selected parameters with values that ensure proper operation. . The default setting is Off. . .
Archive print If you are printing pages to be stored for a long time, use this option to set the product to a mode that reduces toner smearing and dusting. . Press the back button to return to the previous level. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Main menus Setup menu Reports System setup Service Network config. Service menu Use this menu to restore default settings, clean the product, and activate special modes that affect print output. .